Thunder KK Pro and the Taranis

How tos

I recently got a Taranis Transmitter and I love it. I started going through my models binding them with my radio. I got stuck on my 250 Quad running a cheap Thunder KK Pro. It took me a while to confugre my radio to work with this and the Spectrum satellite I am running on it. First I had to confirm that the Channels were set up correctly then I had to set the throttle to 125% so it would arm. I noticed that the rudder was backwards so I had to change that up. I didn’t find much info on the internet for this set up, so I figured I would write it up for you.

Here is my set up that is working great for me.

The main screen just basic stuff.
screen1

Here are the two flight modes I added.

flightmodes

Here are the basic inputs.

inputs

Here is the mixer setup.mixerServo setup.
servosThis is the one curve I used.
curvesThe special Functions screen.specialfuncThat is how i set up my Thunder KK Pro Flight controller for my little Quadcopter. If you need any more info or a shortcut. I included my eepe file 250Quad.eepe.

 

 

 

Leave a Reply